Defy Fan Oven Element 1800W

Product Description

Replace your faulty oven element with this 2 turn, 1800 Watt element.

The fan oven element is responsible for heating the oven cavity in order to cook the food. In an electric cooker when the cooker knob is turned on, electricity flows to the element which causes it to heat up. Once the element reaches the desired temperature then the electricity flow switches on and off to maintain the temperature. This process is controlled by the thermostat.

The following faults typically indicate a problem with the oven element:

o The fan oven is blowing out cold air
o The oven won't heat up at all
o The element doesn't heat up during operation
o There are bright spots or uneven patches on the element during use.
*Remember that a blown oven element may not be the only fault that can cause these issues to arise.

How to replace a fan oven element (Don't foget to checkout the video below!)

1. On most models you will need to remove the panel in front of the element, this will usually be held in place by a few retaining screws. You should then be able to see and access the element.
2. The element will probably have some retaining screws that need to be removed before you pull the element out.
3. You will then need to remove the clips and detach the wires to separate the faulty element from the oven. If the clips are a bit tight you can just use some pliers.
4. To fit the new element, you just need to wire it in, fix it to the back panel and re-attach the housing.
*These instructions are intended to provide a general guide and the process may be slightly different depending on the model of oven you own. Remember, to disconnect the appliance and turn off the power before attempting the repair.

Please check model fit list to ensure this part is correct for your model.

Specification:

• 2 Turn
• 1800 watts
• Height: 225 (mm)
• Width 202 mm
• Bracket : 70 mm
• Tags: 24 mm
• Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts