We Offer Express Delivery On All Orders We Offer Express Delivery On All Orders

    Electra ZE090 Vacuum Belt - Pack Of 2

    BuySpares Approved part

    €7.09 Pack of 2

    Save 10% if you buy 2 or more - only €6.38

    Electra ZE090 Vacuum Belt - Pack Of 2

    Electra ZE090 Vacuum Belt - Pack Of 2

    €7.09

    BuySpares Approved part

    Stock No: 1589335BS

    • Product Description

      If the agitator belt on your vacuum cleaner has snapped then this pack of 2 replacement belts will have you vacuuming again in no time. They are designed to fit a selection of Electrolux models. Learn more about vacuum belts below:

      What does the vacuum belt do?
      The vacuum belt is a key component of an upright vacuum cleaner. Its primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets. Vacuum belts are made of rubber and they are stretched between the motor pulley, which powers the belt, and the brush bar/agitator.

      Is a faulty belt causing the problem?
      The following faults typically indicate a problem with the vacuum belt:

      o The vacuum is on but it doesn't seem to pick up
      o The vacuum has the smell of burnt rubber
      o The vacuum cleaner has become harder to push
      o The brush roll/agitator has stopped spinning
      *Remember that a snapped or loose vacuum belt is the most likely cause, but this may not be the only fault that can cause these issues to arise.

      When should you replace a vacuum belt?
      Vacuum belts need to be replaced as soon as they become damaged. They are designed to snap if the brush roll becomes blocked in order to protect the motor. To ensure that your vacuum cleaner maintains effective performance it is usually suggested that you replace the belt around every 4 - 6 months as they can easily become stretched. It is also recommended that you keep a spare vacuum belt in the cupboard, so you are prepared.

      You can check for signs of a damaged belt by turning on the vacuum cleaner and laying it on its side. Simply look underneath the vacuum cleaner to identify if the brush bar is spinning. If the brush bar doesn't move then the belt needs to be replaced. Also when you remove a suspected worn belt it may have become mis-shaped or have visible signs of wear such as burn marks.

      What causes vacuum belts to fail?
      A key cause of vacuum belt failure is a blockage that stops the agitator brush bar from being able to rotate. This can be caused be numerous things, but hair and thread from the carpet becoming tangled around the brush bar is a common cause. In order to prevent future problems, you should take the time to cut away and remove any obstructions as part of your regular vacuum cleaner maintenance.

      Help and tips from the appliance repair experts
      1.
      New vacuum belts can be tight to fit. If you are struggling to fit the new belt, you may find that warming it slightly with a hairdryer may make it more pliable.
      2. When your new belt arrives it may appear to be considerably shorter than the faulty one. Don't worry as the old one will just have become stretched during constant use.

      Suitable for select models of Argos Value, Bush, Electrolux and John Lewis vacuum cleaners.

      Please check the list of suitable models to ensure that this spare part will fit your appliance.

      Specification:

      • Type: ZE090
      • Pack of 2
      • Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts
      • Electrolux ZE090 Drive Belt - Pack Of 2

        Genuine spare part

        Type: ZE090 Pack of 2 If the brush roll on your vacuum cleaner is no longer turning but the motor is still running, it is likely that the belt has... More information

        In stock

        Express Delivery available

        Save 10% if you buy 2 or more - only €7.03

        €7.81

        Pack of 2

        Save 10% if you buy 2 or more - only €7.03

      • Electrolux EF60C Hepa Filter

        Genuine consumable

        Type: EF60C Includes 3 x Cassette & motor filters HEPA (High Efficient Particle Arrester) filters trap very small dust particles, so they are better... More information

        In stock

        Express Delivery available

        Save 10% if you buy 2 or more - only €12.17

        €13.52

        Set of 6

        Save 10% if you buy 2 or more - only €12.17

        Electrolux EF60B Filter Pack

        Genuine consumable

        Bag code: EF60B Includes 1 x Cyclone 1 x Motor & Exhaust filters Washable The filters in your vacuum cleaner play an integral part in its life. Their... More information

        In stock

        Express Delivery available

        Save 10% if you buy 2 or more - only €15.65

        €17.39

        Pack of 3

        Save 10% if you buy 2 or more - only €15.65

        EF86B Hepa Filter

        BuySpares Approved part

        Type: EF86B Blocked filters will reduce the suction in your vacuum cleaner so cleaning and replacing your filters regularly will help to maintain... More information

        In stock

        Express Delivery available

        Save 10% if you buy 2 or more - only €11.52

        €12.80

        Save 10% if you buy 2 or more - only €11.52

        Universal 30 To 36mm Screw Fit Flexi Crevice Tool

        BuySpares Approved part

        Fits externally to 30-36 mm Vacuum Hoses & Extension Tubes Detachable Brush Length:63 cm Perfect for cleaning behind cabinets and in between awkward... More information

        In stock

        Express Delivery available

        €14.23

        Universal 30.5mm To 37mm Screw Fit Floor Tool

        BuySpares Approved part

        Supplied with screw fit collar and pip fitting collar Adjustable fitting (30.5 to 37mm*) suitable for almost every make of vacuum cleaner (not Dyson)... More information

        In stock

        Express Delivery available

        €17.39

    • Reviews

    BuySpares Approved part

    Stock No: 1589335BS