Siemens Door Seal

    • This product is not available to order.

    Siemens Door Seal

    Siemens Door Seal

    • This product is not available to order.

    BuySpares Approved part

    Stock No: 2494455BS

    • Product Description

      What does the washing machine door seal do?

      The washing machine door seal, otherwise known as a gasket, is a very important part of the appliance on a front loader machine. It securely seals the door in place when shut to prevent any water getting out. During a cycle, most washing machine doors automatically lock which is when the door seal does its job best.

      Is the washing machine door seal causing the problem?

      The faults listed below indicate an issue with the door seal. You may need to replace the seal if:

      o Your appliance is leaking from the front of the door
      o The door seal is torn, warped or damaged
      o Mould has built up at the bottom of the seal and it's beyond cleaning

      Bear in mind that the door seal may not be the only fault that can cause a leak in your washing machine.

      When you need to replace a washing machine door seal

      Door seals are not a consumable item and so they will usually only need to be replaced if they are perished or broken. However, constant opening and closing of the door can eventually take its toll on the seal, compressing it which can result in a leak.

      If you leave any hard objects in the machine during the cycle such as keys or coins, this can tear the door seal, while water left at the bottom of the seal can cause it to perish. If you notice that you door seal is wearing away then it's probably time to change it.

      How to replace the washing machine door seal

      1: Remove the retaining band that holds the door seal against the front of the washing machine. Some can be prized off with a screwdriver, whilst others have a fastening
      2: Once the outer retaining band is removed, then pull away the seal.
      3: Fit the new seal, making sure that the drain holes at bottom. Make sure that it's all fixed on securely.
      4: Finally, attach the new seal to front of the washing machine, with the retaining band on.

      Please note that these steps are a rough guide and they may vary depending on the make and model of your washing machine. Remember, safety first, always switch off your appliance at the mains when carrying out appliance maintenance.

      Suitable for select Bosch and Siemens washing machine models.

      Please check model fit list to ensure this part is correct for your model.

      • Also Known As: Door Rubber, Door Gasket
      • Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts
      • Wellco Washing Machine & Dishwasher Cleaner & Descaler

        Removes stale odours, limescale and detergent build up Hygienically cleans all internal parts If used with new appliances, reduces detergent quantity...

        More information

        In stock - Available for Immediate Despatch

        Save 10% if you buy 2 or more - only €5.30

        €5.89

        Save 10% if you buy 2 or more - only €5.30

        Universal 4m Vent Hose (3. 5"Dia)

        BuySpares Approved part

        Length: 4m Diameter: 3.5" Venting your tumble dryer is crucial if you don't want a build up of moisture in your home. So, if your old vent hose has... More information

        In stock - Available for Immediate Despatch

        €17.63

        Universal Permanent Half-Brick Vent Kit

        BuySpares Approved part

        Kit includes: 1 screw pack (8 Screws & 8 Raw plugs) 1 Wall Plate 1 short round to rectangular adaptor 1 White gravity grill with rectangular spigot... More information

        In stock - Available for Immediate Despatch

        €29.41

        Kit
    • Reviews

    BuySpares Approved part

    Stock No: 2494455BS