Fan Oven Element 2000W

If your oven is no longer heating up and cooking your food unevenly, then you may have a fault with the fan oven element.

The fan oven element is responsible for heating the oven cavity in order to cook the food. In an electric cooker when the cooker is turned on, electricity flows to the element which causes it to heat up. Once the element reaches the desired temperature then the electricity flow switches on and off to maintain the temperature. This process is controlled by the thermostat.

Oven elements fail when the internal element filament burns out, this can cause the element to short circuit. There may be visible signs the element has blown such as a split, bulge, or blow hole on the element. Other signs of a failed element include; the oven not heating up, the oven blowing out cold air or bright spots during use.

The causes of element failure:

There are a number of factors that can cause an oven element to blow. Damage due to the expansion and contraction of the element coils caused by the element constantly heating up and cooling down is a very common cause. While other causes of element failure can include overheating as a result of a failed thermostat or in some cases a build-up of grease causing the fan motor to run slowly.

With this quality replacement, you can help get your oven back to heating as it should.

Please check model fit list to ensure this part is correct for your model.

Specification:

• 2000 watts
• 2 Turn
• Height 225 mm
• Width 205 mm
• Bracket 70 mm
• Tags 24 mm

Manufacturers Part Number

• 32036509

Alternative Part Numbers

• C32036509
• VSTC32036509