Kenwood Juicer Bowl

A faulty juicing system can reduce your Kenwood Food Processor's ability to extract juice efficiently from firm fruits and vegetables.

Use this genuine Kenwood Juicer Bowl to replace a cracked or broken bowl and ensure that your pulp is evenly distributed, that your Juicer's moving parts move correctly, and that your Processor performs free of leakages.

Maximum capacity:
The Centrifugal juicer juices firm fruit and vegetables ie. apples and carrots, auto 1Kg/2lb 4oz apples 800g/1lb 12oz carrots, or juices soft fruits ie. grapes and tomatoes 500g/1lb 2oz.

To use the centrifugal juicer;
1 Fit the juicer drive adaptor onto the power unit – push down lightly to ensure the adaptor is located correctly.
2 Then fit the juicer bowl. Place the handle towards the back and turn clockwise until it locks .
3 Place the pulp remover into the filter drum - ensuring the tabs locate with the slots in the bottom of the drum .
4 Fit the filter drum .
5 Place the attachment lid onto the bowl, turn until it locks and the feed tube sits over the handle Your juicer will not operate if the bowl or lid are not fitted correctly into the interlock.
6 Place a suitable glass or jug under the juice outlet.
7 Cut the food to fit the feed tube.
8 Select auto and push down evenly with the pusher - never put your fingers in the feed tube. Process fully before adding more.
9 After adding the last piece, let the juicer run for a further 30 seconds to extract all the juice from the filter drum.

Please check the model fit list to ensure that this part is correct for your model.

Specification:

• Not suitable for dishwashing
• Capacity up to 1kg depending on the food

Manufacturers Part Number

• 715527

Alternative Part Numbers

• KW715527